WELCOME TO OUR BUILDING A TIMBER CUPBOARD PROJECT
Summary: Building a cupboard. Timber frames for storage units
This project contains basic principles for building a frame for a basic cupboard. It can be expanded on by using different designs, the struts can be moved to accommodate shelves or simply left open plan. It will give you the idea of building storage space onto your home and can even be adapted to make a corner cupboard. The timber sizes can be changed and more struts can be put in to ensure greater strength if you feel you need it. The structure can be fixed to any wall, ceiling or floor using our guides to fixing. Check the wall, floor and ceiling area for pipes and cables before you drill anything.
Tools you will need. Most of these can be found at the
bottom of this page, the rest can be found by clicking on the toolstore
link at the bottom of the page.
With the number of different door designs available from kitchen and DIY stores these days we suggest it may be a good idea for you to find the doors (if you intend to have them) first. The frame can easily be built around the door size and you will have guaranteed matching your existing decor.
We have deliberately not given any dimensions in the project. Even when planed timber can vary by a mm or so and ceiling heights can vary considerably. Measure your own timber and other dimensions carefully and remember.>Measure twice-Cut once
Use a carpenters square to make all cuts. Neat joints are impossible without a completely square face to begin with. Also if the timber is not square at the end, a measurement to the other end will vary, depending on which side you measure from. This can make it impossible to get a decent finish.
Check your walls are square to each other using our 3, 4 5 method shown below.
HOW DO I CHECK MY ROOM IS SQUARE (click on link for more tips and tricks)
Floor tiling, carpets, any number
of things around the home require a degree of setting out. Remember a
quarter of an inch out at one end of a 12 foot room, means about 2
inches out at the other end. It is important to start any appropriate
projects with straight and square lines and it is very easy to
accomplish. The method is called 3,4,5 and for the technically minded is
based on Pythagoras's theorem which we won't go into now ! Suffice to
say that if you measure along one wall 3 feet (or metres or any other
unit), and along the other wall 4 of the same unit, the diagonal line in
between the points should measure 5 units. If it does your walls are
square, if it doesn't, you need to mark some points that are square to
start your work.
|
Draw your plan before you start.
Floor/ceiling + cross rail joints
Cross rail to post joints
Mark the position of the struts lightly on the walls when your frame is in place. You will not be able to see them when you are attaching the cladding, making fixing to them a bit of a lottery. The pencil marks can be rubbed out later.
Next, cut and fix the shelf or shelves. This can be done more easily when you can get to all sides. The side rails which support the cladding should be fixed at no less than 600mm centres for 12.5mm cladding and if your cladding is thinner than that, they should be spaced at 450mm centres.
The shelves and cladding material we have left up to you.
The joints between the cupboard and the wall/ceiling can easily be filled with flexible filler or decorators caulk using an sealant or "applicator" gun as shown below. Alternatively you may like to fix some coving or a shaped timber moulding.
No comments:
Post a Comment